#
# For a description of the syntax of this configuration file,
# see the Configure script.
#
*
* Machine Type
*
bool 'Amiga support' CONFIG_AMIGA n
bool 'Atari support' CONFIG_ATARI y
bool 'Macintosh support' CONFIG_MAC n
*
* General setup
*
if [ "$CONFIG_ATARI" = "n" ]
bool '68040 floating point software package' CONFIG_FPSP_040 y
else
bool '68040 floating point software package' CONFIG_FPSP_040 n
fi
bool 'PC IDE harddisk support' CONFIG_BLK_DEV_HD n
if [ "$CONFIG_AMIGA" = "y" ]
bool 'Amiga Gayle IDE harddisk support' CONFIG_AMIGA_IDE y
else
bool 'Amiga Gayle IDE harddisk support' CONFIG_AMIGA_IDE n
fi
if [ "$CONFIG_ATARI" = "y" ]
bool 'Atari Falcon IDE harddisk support' CONFIG_ATARI_FALCON_IDE y
else
bool 'Atari Falcon IDE harddisk support' CONFIG_ATARI_FALCON_IDE n
fi
if [ "$CONFIG_ATARI" = "y" ]
bool 'Limit Floppy drive to DD only' CONFIG_FLOPPY_DD_ONLY n
fi
bool 'TCP/IP networking' CONFIG_INET n
bool 'Limit memory to low 16MB' CONFIG_MAX_16M n
*
* Program binary formats
*
bool 'Elf executables' CONFIG_BINFMT_ELF n
*
* SCSI support
*
bool 'SCSI support?' CONFIG_SCSI y
if [ "$CONFIG_SCSI" = "n" ]
:
: Skipping SCSI configuration options...
:
else
	*
	* SCSI support type (disk, tape, CDrom)
	*
bool 'Scsi disk support' CONFIG_BLK_DEV_SD y
bool 'Scsi tape support' CONFIG_CHR_DEV_ST y
bool 'Scsi CDROM support' CONFIG_BLK_DEV_SR y
bool 'Scsi generic support' CONFIG_CHR_DEV_SG y
	*
	* SCSI low-level drivers
	*
if [ "$CONFIG_AMIGA" = "y" ]
bool 'A3000 WD33C93A support' CONFIG_A3000_SCSI y
bool 'A2091 WD33C93A support' CONFIG_A2091_SCSI y
bool 'GVP Series II WD33C93A support' CONFIG_GVP11_SCSI y
bool 'Atari TT native SCSI support' CONFIG_ATARI_TT_SCSI n
bool 'Atari Falcon native SCSI support' CONFIG_ATARI_FALCON_SCSI n
else
bool 'A3000 WD33C93A support' CONFIG_A3000_SCSI n
bool 'A2091 WD33C93A support' CONFIG_A2091_SCSI n
bool 'GVP Series II WD33C93A support' CONFIG_GVP11_SCSI n
bool 'Atari TT native SCSI support' CONFIG_ATARI_TT_SCSI y
bool 'Atari Falcon native SCSI support' CONFIG_ATARI_FALCON_SCSI y
fi
fi
*
* Network device support
*
bool 'Network device support?' CONFIG_ETHERCARDS n
if [ "$CONFIG_ETHERCARDS" = "n" ]
:
: Skipping ethercard configuration options...
:
else
bool 'SLIP (serial line) support' CONFIG_SLIP n
if [ "$CONFIG_SLIP" = "y" ]
  bool ' CSLIP compressed headers' SL_COMPRESSED y
  bool ' SLIP debugging on' SL_DUMP y
fi
#bool 'PPP (point-to-point) support' CONFIG_PPP n
bool 'PLIP (parallel port) support' CONFIG_PLIP n
bool 'NE2000/NE1000 support' CONFIG_NE2000 n
bool 'WD80*3 support' CONFIG_WD80x3 y
bool 'SMC Ultra support' CONFIG_ULTRA n
bool '3c501 support' CONFIG_EL1 n
bool '3c503 support' CONFIG_EL2 n
#bool '3c505 support' CONFIG_ELPLUS n
#bool '3c507 support' CONFIG_EL16 n
bool '3c509/3c579 support' CONFIG_EL3 n
bool 'HP PCLAN support' CONFIG_HPLAN n
bool 'AT1500 and NE2100 (LANCE and PCnet-ISA) support' CONFIG_LANCE n
bool 'AT1700 support' CONFIG_AT1700 n
#bool 'Zenith Z-Note support' CONFIG_ZNET n
#bool 'EtherExpress support' CONFIG_EEXPRESS n
#bool 'DEPCA support' CONFIG_DEPCA n
#bool 'NI52** support' CONFIG_NI52 n
#bool 'NI65** support' CONFIG_NI65 n
#bool 'Ansel Communications EISA 3200 support' CONFIG_AC3200 n
#bool 'Cabletron E21xx support (not recommended)' CONFIG_E21 n
bool 'D-Link DE600 pocket adaptor support' CONFIG_DE600 n
#bool 'AT-LAN-TEC/RealTek pocket adaptor support' CONFIG_ATP n
fi
*
bool 'Sony CDU31A CDROM driver support' CONFIG_CDU31A n
bool 'Mitsumi CDROM driver support' CONFIG_MCD n
*
* Filesystems
*
bool 'Standard (minix) fs support' CONFIG_MINIX_FS y
bool 'Extended fs support' CONFIG_EXT_FS n
bool 'Second extended fs support' CONFIG_EXT2_FS y
bool 'xiafs filesystem support' CONFIG_XIA_FS n
if [ "$CONFIG_ATARI" = "y" ]
bool 'msdos fs support' CONFIG_MSDOS_FS y
else
bool 'msdos fs support' CONFIG_MSDOS_FS n
fi
bool '/proc filesystem support' CONFIG_PROC_FS y
bool 'NFS filesystem support' CONFIG_NFS_FS n
bool 'ISO9660 cdrom filesystem support' CONFIG_ISO9660_FS y
if [ "$CONFIG_AMIGA = "y" ]
bool 'Amiga FFS filesystem support' CONFIG_AFFS_FS y
else
bool 'Amiga FFS filesystem support' CONFIG_AFFS_FS n
fi
*
* character devices
*
bool 'Parallel printer support' CONFIG_PRINTER y
if [ "$CONFIG_AMIGA" = "y" ] 
bool 'Amiga mouse support' CONFIG_AMIGAMOUSE y
else
bool 'Amiga mouse support' CONFIG_AMIGAMOUSE n
fi
if [ "$CONFIG_ATARI" = "y" ] 
bool 'Atari mouse support' CONFIG_ATARIMOUSE y
else
bool 'Atari mouse support' CONFIG_ATARIMOUSE n
fi
bool 'Keyboard meta-key sends ESC-prefix' CONFIG_KBD_META n
bool 'Keyboard Num Lock on by default' CONFIG_KBD_NUML y
*
* Kernel hacking
*
#bool 'Debug kmalloc/kfree' CONFIG_DEBUG_MALLOC n
bool 'Kernel profiling support' CONFIG_PROFILE n
if [ "$CONFIG_SCSI" = "y" ]
bool 'Verbose scsi error reporting (kernel size +=12K)' CONFIG_SCSI_CONSTANTS y
fi
